Hello and welcome to Quilled Miniature Tutorial post on Kalanirmitee.
I had seen these type of miniature work online and always wondered how its made. So decided to give a try. Here is the tutorial on how I made it.
Material required:
1) Miniature cup and plate
2) White cold porcelain ( you can use any air drying clay)
3) 5mm quilling strips
4) Quilling tool
5) Green wires ( 4 inches)
6) Glue
Procedure:
1) To start you will need cup, plate, clay and wires
2) Take a bunch of wires and twist it.( shown in image below)
3) Bend the wire on both sides.Take a small quantity of clay and place one end of wire on it. With help of glue stick it inside the cup ( refer image below). Let it dry.
3) After the clay placed in cup is completely dried. Take the clay ( quantity of clay will depend on the base of plate) and with help of glue, stick it on the plate. Let clay dry completely ( 5-6 hrs).
4) I have used quilled folded roses for this project. You can use any other flowers made of paper or clay.
Folded Roses:
1) I have used 5 mm quilling strips. To make centre of the rose by turning the strip once around the quilling tool and glue it.
2) Fold the paper downwards forming a right angle.
3) Roll the quilling strip loosely over the fold. Continue folding and rolling the petals. As you roll make sure the rose shape is tight at base and fans out towards the top.
5) Here are my quilled roses.
6) For this project you will need lots of roses. Arrange the roses on your cup and plate as you wish.
Front view of Quilled Rose Miniature.....
I had seen these type of miniature work online and always wondered how its made. So decided to give a try. Here is the tutorial on how I made it.
Material required:
1) Miniature cup and plate
2) White cold porcelain ( you can use any air drying clay)
3) 5mm quilling strips
4) Quilling tool
5) Green wires ( 4 inches)
6) Glue
Procedure:
1) To start you will need cup, plate, clay and wires
2) Take a bunch of wires and twist it.( shown in image below)
3) Bend the wire on both sides.Take a small quantity of clay and place one end of wire on it. With help of glue stick it inside the cup ( refer image below). Let it dry.
3) After the clay placed in cup is completely dried. Take the clay ( quantity of clay will depend on the base of plate) and with help of glue, stick it on the plate. Let clay dry completely ( 5-6 hrs).
4) I have used quilled folded roses for this project. You can use any other flowers made of paper or clay.
Folded Roses:
1) I have used 5 mm quilling strips. To make centre of the rose by turning the strip once around the quilling tool and glue it.
2) Fold the paper downwards forming a right angle.
3) Roll the quilling strip loosely over the fold. Continue folding and rolling the petals. As you roll make sure the rose shape is tight at base and fans out towards the top.
4) When your rose is form in desired size, remove it from quilling tool. Cut the excess paper and glue the end of the paper to secure it.
6) For this project you will need lots of roses. Arrange the roses on your cup and plate as you wish.
Front view of Quilled Rose Miniature.....
Please feel free to contribute and suggest any of your ideas. Your
suggestion and comments will always be welcome. Hope you enjoy my blog.
Thanks for visiting my blog
Happy Quilling!